6 Inch Water Filled Stainless Steel Motor




Product Features :

  • 6” Water filled heavy duty stainless steel submersible motors.
  • Easily rewindable (wet wound) induction motor with PE insulated windings.
  • Completely stainless steel AISI 304 construction.
  • Water lubricated heavy duty radial and axial thrust bearings.
  • Counter thrust bearing.
  • Motors are pre-filled with clean water + Glycol mixture.
  • Shaft extension made of stainless steel AISI 316.
  • High efficiency electrical design (lower operating cost).
  • Tropicalized design (lower winding temperature).
  • 6” NEMA coupling flange.
  • Pressure compensation diaphragm.

 

Details

  • Ratings: Three phase - 4 to 45 kW
  • Supply voltages (Tolerance +10% /-15%).
    • 50 Hz, 3 phase, 380 V, 400 V, 415 V
    • 60 Hz, 3 phase, 230 V, 380 V, 460 V
  • Degree of protection: IP 68
  • Continuous duty
  • Ambient temperature: 45 C
  • Rotation: Three phase - CCW and CW
  • Maximum nos. of starts/hour:
    • 4 to 22 kW - 20
    • 26 to 45 kW - 15
  • water pH: 6.5 - 8
  • Minimum cooling flow along the motor:
    • 4 to 15 kW - 15 cm/sec
    • 18.5 to 45 kW - 30 cm/sec
  • Motor protection: Select thermal overload
  • protection with trip time < 10 sec. at 5 x In
  • Maximum submerged depth: 250 meters.
  • Mounting” vertical / horizontal (up to 30 kW).

 

On Request :

  • Mechanical shaft seal Sic/Sic.
  • Bulit-in PT 100 temperature sensor.
  • Special voltages.
  • Double Cable for Star - Delta operation.
  • PE2/PA winding insulation.

Specifications

Advantage Easy to Operate
Usage Industrial
Performance Optimum
Speciality Rust resistance
Size 6 Inch



Looking for Product Name ?